Helmets

As bikes become more capable and trail riding gets faster the M2 slots into the current generation of open face protection. Conehead technology utilises dual-density foam to dissipate impacts more effectively giving you a safer ride. The Boa Fit System delivers a connected, fast, customized and durable fit, purpose-built for performance. - 19 vents provide cool air intake and heat exhaust - Conehead technology - Full rear head coverage - Custom 7iDP liner for superior fit and comfort - BOA one hand dial fit adjustment - Rapid adjust chin strap - Tested beyond CE, CPSC, AS standards The M2's foam liner is made of two density layers. The outer layer, which is the black part, is made of high-density foam and has cones facing inwards. The inner layer, the grey part which is close to the head, is made of softer low-density foam and has cones facing outwards.

- Open face all mountain design - 19 vents - ConeHead Technology utilizing dual density foams in impact absorbing zones - Full rear coverage - Boa one hand dial fit adjustment - Adjustable visor - Rapid adjust chin strap - Certified : CPSC Bike Sizing: - X-Small/Small = 52 – 55cm - Medium/Large = 56 – 59cm - X-Large/XX-Large: 60 – 63cm

- Lightweight polycarbonate shell full face protection - 17 vents provide cool air intake and heat exhaust - Foam padded internal muzzle - Large eye port for greater field of vision and improved goggle fit - Adjustable peak - Mesh backed covered vents stop debris getting through - Certified : CPSC Bike Sizing: - Small = 55 – 56cm - Medium = 57 – 58cm - Large: 59 – 60cm - X-Large: 61 – 62cm

- Lightweight ABS shell - Quick release liner for easy washing - 23 Large freeflow vents with internal channels for maximum cooling - Lightweight ABS shell - Quick release liner for easy washing - 23 Large freeflow vents with internal channels for maximum cooling - Crash release visor system - Easy position visor, no bolts needed - D Ring closure - Certified: CPSC Bicycle & ASTM F1952-15 (Downhill) Sizing: - Small = 57 – 58cm - Medium = 59 – 60cm - Large: 61 – 62cm - X-Large: 63 – 64cm - XX-Large: 65 – 66cm

- Lightweight fiberglass shell - 23 Large freeflow vents with internal channels for maximum cooling. - Energy absorbsion and slip plane technology - Crash release visor system - Easy position visor, no bolts needed - Quick release liner for easy washing - Agion Bluesign approved antimicrobial treatment - Fidlock magnetic closure - Certified: CPSC Bicycle & ASTM F1952-15 (Downhill) Sizing: - Small = 55 – 56cm - Medium = 57 – 58cm - Large: 59 – 60cm - X-Large: 61 – 62cm - XX-Large: 63 – 64cm

The Scraper 3.0 is just as much at home on the bike as in the halfpipe, protecting the BMX rider as reliably as the longboard fan. And, with the optional winter kit, you can get after it in all types of weather. The intelligent ventilation system, with its many inlets and outlets, and the numerous adjustment options that adapt the Scraper 3.0 to each head in a few easy steps, ensure the greatest possible comfort. - ABS hard-shell technology - High visibility due to powerful reflectors - Ponytail compatibility: Helmet well suited to plait wearers - Forced Air Cooling Technology: Sophisticated ventilation system for an optimal head climate - Excellent ventilation with 4 air inlets and 4 air outlets - Size adjustment by means of a half-ring made from particularly hard-wearing and slightly malleable plastic for optimal stability and fit - Zoom Ace Urban: Finely adjustable fit system with a handy adjustment wheel Sizing: - Medium: 54 – 58cm - Large: 57 – 62cm

The Macator is a sporty entry-level helmet for cyclists looking for an outstanding all-around helmet. The Macator not only has comfortable padding but also offers excellent ventilation. - In-Mold: Lightweight, durable helmet with a long-lasting combination of EPS core and Polycarbonate shell - Bug mesh: Full protection from insects - Ponytail compatibility: Perfect fit for people with long hair - Full-ring: Adjustable ring connected to adjustment system enclosing all of the head - Excellent ventilation with 5 air inlets and 8 air outlets - Zoom Ace: Finely adjustable fit system with handy adjustment wheel for a customizable fit Sizing: - Medium: 51-55cm - Large: 52-58cm - X-Large: 58-62cm

FOR OFF-ROAD ADVENTURES An ideal off-road helmet for the first rides on uneven terrain. The MoTrip promises a high level of comfort for your rides over hill and dale. The deep fit of the MTB helmet ensures the best possible protection for the head. To make off-road rides more comfortable, the MoTrip is also equipped with the MTB adjustment system. This enable both individual size adjustment and height adjustability using the adjustment wheel at the back of the head. This is a great advantage for ponytail wearers, as they can make room for a ponytail by adjusting the height. Go on off-road adventures with the lightweight and well ventilated bike helmet or alternatively wear it for commuting. - In-Mould for a permanent bond between the outer shell and the shock-absorbing helmet material (EPS) - Zoom Ace MTB: Height-adjustable adjustment system to fit the head circumference - Ponytail compatibility: Helmet well suited for ponytail wearers - Adjustable strap divider - Height-adjustable visor - Ventilation: excellent ventilation through 6 air inlets and 8 air outlets

Quin Sensor for AirDrop/Moventor 2.0 MIPS/MoDrop/MoDrop MIPS

The Hyban 2.0 combines a particularly robust, hard shell with huge air intakes. In combination with the bright, integrated LED rear light, the Hyban 2.0 is the perfect everyday helmet for the city. - ABS hard shell: Robust helmet made of EPS foam and injection molded outer shell - High visibility: High visibility due to reflectors - Bug mesh: Full protection from insects - Ponytail compatibility: Perfect fit for people with long hair - Full-ring: Adjustable ring connected to adjustment system enclosing all of the head - Excellent ventilation with 5 air inlets and 8 air outlets - Zoom Ace Urban: Finely adjustable adjustment system with handy adjustment wheel for a customizable fit - Large, high-mounted, and integrated LED taillight with 180° visibility Sizing: - Medium: 52-58cm - Large: 56-61cm - X-Large: 58-63cm

For maximum safety, the Viantor has the ActiCage structural reinforcement integrated into the EPS. It provides maximum protection while ensuring optimal ventilation and extreme comfort. - ActiCage allows for large ventilation openings without compromising the helmet's safety - Multi Shell In-Mold for durable bonding of multi-part outer shell and shock-absorbing helmet material (EPS) - Good ventilation with 4 air inlets and 14 air outlets connected with flow channels - Zoom Ace fit system with a non-slip adjustment wheel - Semi-enclosing plastic ring connected to the adjustment system for optimum stability and fit - Ponytail-compatible and well suited for braided hairstyles Sizing: - Small: 51 – 55cm - Medium: 52 – 58cm - Large: 58 – 63cm

THE BEST OF BOTH WORLDS The Hyban 2.0 combines a particularly robust hard shell with a huge air intakes. In combination with the integrated, bright LED rear light, the Hyban 2.0 is the perfect everyday helmet for the city. - ABS hard shell: Robust helmet made of EPS foam and injection molded outer shell - High visibility: High visibility due to reflectors - Bug mesh: Full protection from insects - Ponytail compatibility: Perfect fit for people with long hair - Full-ring: Adjustable ring connected to adjustment system enclosing all of the head - Excellent ventilation with 5 air inlets and 8 air outlets - Zoom Ace Urban: Finely adjustable adjustment system with handy adjustment wheel for customisable fit - Large, highly mounted and integrated LED tail light with 180° visibility

ALLL-ROUND HELMET The Macator is a sporty entry-level helmet for cyclists looking for an outstanding all-round helmet. The Macator has not only a comfortable padding but also offers an excellent ventilation, and it comes in a variety of bright, highly-visible colors. In-Mold: Lightweight, durable helmet with a long-lasting combination of EPS core and Polycarbonate shell - Bug mesh: Full protection from insects - Ponytail compatibility: Perfect fit for people with long hair - Full-ring: Adjustable ring connected to adjustment system enclosing all of the head - Excellent ventilation with 5 air inlets and 8 air outlets - Zoom Ace: Finely adjustable adjustment system with handy adjustment wheel for customizable fit

THE ALL-ROUNDER IN THE MTB RANGE The ABUS MoDrop can handle any terrain and any riding style and always leaves you wanting more. The mountain bike helmet is the best companion for big mountain days, experiences on the trail or just leisurely family outings. Equipped with our MTB-specific adjustment system and TriVider webbing distributors, this helmet offers many features that make it more comfortable to wear. The height-adjustable, visor-like visor protects you from hanging branches when riding downhill. In the event of a fall, it can also prevent direct impact with the face. Thanks to the helmet's two-part outer shell, the lower edge can also be protected. This also allows a lot of freedom in design, and that can really be seen in the MoDrop. The helmet combines everything that a good off-road rider needs both visually and functionally. Multi-Shell In-Mould for a permanent bond between the outer shell and the shock-absorbing helmet material (EPS) - Zoom Ace MTB: Height-adjustable adjustment system to fit the head circumference - Ponytail compatibility: Helmet well suited for ponytail wearers - Laterally adjustable, non-slip TriVider webbing distributor - Moulded lower shell for added durability - QUIN ready—easy upgrade with the separately available QUIN chip for fall detection - GoggFit: Device that allows a pair of goggles to be fixed to the helmet when the athlete doesn't need them while riding. - Ventilation: excellent ventilation for this helmet type due to 6 air inlets and 8 air outlets - Bug mesh: thorough protection against insects

This all-mountain helmet is light, extremely well ventilated and extremely comfortable. It is perfect for racing or everyday off-road use. - In-Mold for a durable connection with the outer shell with shock-absorbing helmet material (EPS) - Good ventilation with 5 air inlets and 7 air outlets connected with flow channels - Semi-enclosing plastic ring connected to the adjustment system for optimum stability and form-fitness - Bottom edge protects the helmet from external influences - ActiCage, a structural reinforcement integrated in the EPS to optimise stability - Zoom Ace adjustment system with non-slip adjustment wheel for individual fit - Ponytail compatible and well suited for braided hairstyles

THE BEST OF BOTH WORLDS The Hyban 2.0 combines a particularly robust hard shell with a huge air intakes. In combination with the integrated, bright LED rear light, the Hyban 2.0 is the perfect everyday helmet for the city. - ABS hard shell: Robust helmet made of EPS foam and injection molded outer shell - High visibility: High visibility thanks to powerful integrated LEDs - Bug mesh: Full protection from insects - Ponytail compatibility: Perfect fit for people with long hair - Full-ring: Adjustable ring connected to adjustment system enclosing all of the head - Excellent ventilation with 5 air inlets and 8 air outlets - Zoom Ace Urban: Finely adjustable adjustment system with handy adjustment wheel for customisable fit - Large, highly mounted and integrated LED tail light with 180° visibility

FOR MORE SAFETY The ABUS MoDrop MIPS can handle any terrain and any riding style and always leaves you wanting more. The mountain bike helmet is the best companion for big mountain days, experiences on the trail or just leisurely family outings. Equipped with our MTB-specific adjustment system and TriVider webbing distributors, this helmet offers many features that make it more comfortable to wear. The height-adjustable, visor-like visor protects you from hanging branches when riding downhill. In the event of a fall, it can also prevent direct impact with the face. Additional safety is provided by the MIPS impact protection. This is intended to protect the brain, especially if the cyclist's head hits the ground at an angle during a fall. In a fall, the brain is exposed to strong rotational movements that can lead to severe brain injuries. With MIPS, a movable low-friction plastic shell is integrated into the helmet to ensure that rotation is reduced and the head is better protected. - Multi-Shell In-Mould for a permanent bond between the outer shell and the shock-absorbing helmet material (EPS) - Zoom Ace MTB: Height-adjustable adjustment system to fit the head circumference - Ponytail compatibility: Helmet well suited for ponytail wearers - Laterally adjustable, non-slip TriVider webbing distributor - Molded lower shell for added durability - QUIN ready—easy upgrade with the separately available QUIN chip for fall detection - GoggFit: Device that allows a pair of goggles to be fixed to the helmet when the athlete doesn't need them while riding - MIPS: Impact protection that protects the brain, especially when the cyclist's head hits the ground at an angle during a fall. - Ventilation: excellent ventilation for this helmet type due to 6 air inlets and 8 air outlets - Bug mesh: thorough protection against insects

PROFESSIONAL TECHNOLOGY FOR BEGINNERS The Viantor is the high-quality and lightweight helmet for beginners in which we have used many proven technologies from the professional sport. Let yourself be convinced by a high-quality and safe helmet, which has the advantages of a professional race helmet. For maximum safety, the Viantor has the ActiCage structural reinforcement integrated in the EPS. It provides maximum protection while ensuring optimal ventilation and extreme comfort. The ActiCage allows for large ventilation openings without compromising on the helmet's safety. Due to its ponytail compatibility, the Viantor from ABUS is the first choice for riders with long hair. Multi Shell In-Mold for durable bonding of multi-part outer shell and shock-absorbing helmet material (EPS) - Ponytail compatibility: Helmet well suited for braided hairstyles - Good ventilation with 4 air inlets and 14 air outlets connected with flow channels - Semi-enclosing plastic ring connected to the adjustment system for optimum stability and form-fitness - ActiCage: Structural reinforcement integrated in the EPS to optimize stability - Zoom Ace: Fine-adjustable adjustment system with non-slip adjustment wheel for individual fit

The MonTrailer offers this increased need for protection and a multitude of well thought-out features for off-road use. This mountain bike helmet is light, extremely well ventilated and extremely comfortable and is perfect for racing or the everyday trail tour. - In-Mold for a durable connection with the outer shell with shock-absorbing helmet material (EPS) - Good ventilation with 5 air inlets and 7 air outlets connected with flow channels - Semi-enclosing plastic ring connected to the adjustment system for optimum stability and form-fitness - Bottom edge protects the helmet from external influences - ActiCage, a structural reinforcement integrated in the EPS to optimise stability - Zoom Ace adjustment system with non-slip adjustment wheel for individual fit - GoggFit ensures safe positioning of glasses and provides storage space when not in use - The transparent visor gives the wearer good all-round vision without having to take their eyes off the trail

The Pedelec 2.0 offers an uncompromising combination of comfort and protection. Complemented by clever features, it is the ideal companion when cycling in road traffic. - In-Mold for a durable connection with the outer shell with shock-absorbing helmet material (EPS) - Forced Air Cooling Technology ventilation system keeps you cool and comfortable with 4 air inlets and 9 air outlets connected with flow channels - Zoom Ace Urban adjustment system with handy adjustment wheel for a customizable fit - Size adjustment by means of a half-ring made from particularly hard-wearing and slightly malleable plastic for optimal stability and fit - High visibility due to powerful reflectors and an integrated LED taillight with 180-degree visibility - Foamed-in fly nets keep insects out - Lower edge protection provides the helmet with additional protection from external influences - Fidlock magnetic strap buckle - Ponytail-compatible and well suited for braided hairstyles Sizing: - Medium: 52 – 57cm - Large: 56 – 62cm

SAFETY ON STEEP TRAILS Steep climbs, high-speed racing, all-day adventures: "Down-country" is action-packed, which means the demands on equipment also increase. Down-country is all about going up fast, down fast and repeating. The Moventor 2.0 MIPS is virtually perfectly for the demands of mountain bikers. The MTB helmet is lightweight, well ventilated and has a deeper fit that gives more protection at the back of the head. When the trail points downwards, the ten air inlets and nine air outlets provide good ventilation. In addition to all the well thought-out features for off-road use, the MIPS model has impact protection. This is intended to protect the brain, especially if the cyclist's head hits the ground at an angle during a fall. In a fall, the brain is exposed to strong rotational movements that can lead to severe brain injuries. With MIPS, a movable low-friction plastic shell is integrated into the helmet to ensure that rotation is reduced and the head is better protected. - Multi-Shell In-Mould for a permanent bond between the outer shell and the shock-absorbing helmet material (EPS) - Zoom Ace MTB: Height-adjustable adjustment system to fit the head circumference - Ponytail compatibility: Helmet well suited for ponytail wearers - Laterally adjustable, non-slip TriVider strap system - Moulded lower shell for added durability - QUIN ready—easy upgrade with the separately available QUIN chip for fall detection - MIPS: Impact protection that protects the brain, especially when the cyclist's head hits the ground at an angle during a fall. - GoggFit: Device that allows a pair of goggles to be fixed to the helmet when the athlete doesn't need them while riding - Ventilation: excellent ventilation through 10 air inlets and 9 air outlets

The combination of innovative design, the latest technology, outstanding functionality, maximum ventilation, and low weight make the Aventor a real allrounder. The Aventor is the perfect helmet for cyclists who need a cool head for riding in high temperatures and on challenging stages. - Double shell, in-mold construction for durable fusion of the outer shell with the shock-absorbing helmet material (EPS) - Lower edge protection provides the helmet with additional protection coverage - ActiCage, structural reinforcement integrated into the EPS, optimizes stability - Zoom Ace, fine adjustment system with handy dial provides a personalized fit - Half-surrounding plastic ring connected to adjustment system - Ponytail compatible - Fidlock magnetic strap buckle Sizing: - Small: 51 – 55cm - Medium: 54 – 58cm - Large: 57 – 61cm

FOR DEMANDING TRAILS The CliffHanger is the flagship trail model in the ABUS MTB series. When you're riding up and down steep hills on an enduro bike, the MTB helmet offers reliable protection. Lighter, better ventilated and with an adjustable TriVider webbing spreader—the CliffHanger scores with these features. The special MTB adjustment system also ensures that the helmet sits comfortably and firmly on the head when rattling through the wildest of rock gardens. The inner shell made of EPS hard foam is foamed into a three-part outer shell, making a lightweight and sturdy helmet. The existing Multi-directional Impact Protection System (MIPS) can reduce energy by up to 40 percent in the event of an oblique impact. With the CliffHanger, we have succeeded in developing a helmet that offers virtually perfect conditions for high speeds and demanding trails. - Multi-Shell In-Mould for a permanent bond between the outer shell and the shock-absorbing helmet material (EPS) - Zoom Ace MTB: Height-adjustable adjustment system to fit the head circumference - Ponytail compatibility: Helmet well suited for ponytail wearers - Laterally adjustable, non-slip TriVider strap system - QUIN ready—easy upgrade with the separately available QUIN chip for fall detection - MIPS: Impact protection that protects the brain, especially when the cyclist's head hits the ground at an angle during a fall. - ActiCage: Structural reinforcement integrated in the EPS to optimise stability - Moulded lower shell for added durability - Height-adjustable visor - GoggFit: Device that allows a pair of goggles to be fixed to the helmet when the athlete doesn't need them while riding - Ventilation: excellent ventilation through 8 air inlets and 6 air outlets - FidLock magnetic buckle

A HELMET MADE FOR THE CITY STREETS The Pedelec 2.0 is an uncompromising combination of protection and comfort. Complemented by clever features, it is the ideal companion in road traffic. In big city traffic, a helmet is an indispensable companion for you as a cyclist. Accidents happen quickly and if you fall, a bicycle helmet protects you against serious injury. With the Pedelec 2.0, ABUS offers a bicycle helmet that meets the high safety requirements of the big city. Its deep temple area provides the required additional protection. The Pedelec 2.0 is also characterised by the integrated rain hood, which can be quickly pulled over the helmet at the first sign of rain. The especially bright, rechargeable light and the replaceable visor offer additional, passive protection. - This NTA 8776 helmet is a helmet that complies with the requirements in the Dutch Technical Agreement (NTA) 8776. - In-Mold for a durable connection with the outer shell with shock-absorbing helmet material (EPS) - High visibility due to powerful reflectors - Large, highly mounted and integrated LED tail light with 180° visibility - Forced Air Cooling Technology: Sophisticated ventilation system for an optimal head climate - Excellent ventilation with 4 air inlets and 9 air outlets connected with flow channels - Ponytail compatibility: Helmet well suited to plait wearers - Zoom Ace Urban: Finely adjustable adjustment system with handy adjustment wheel for customisable fit - Size adjustment by means of a half ring made from particularly hard-wearing and slightly malleable plastic for optimal stability and form fitting - Foamed-in fly nets - Lower edge protection: Provides the helmet with additional protection from external influences - Fidlock magnetic strap buckle - Rain cover integrated in the helmet

Availability, certification, color, and pricing may vary per region. If outside of the USA, please check with your authorized local dealer for more information.

Availability, certification, color, and pricing may vary per region. If outside of the USA, please check with your authorized local dealer for more information.

Availability, certification, color, and pricing may vary per region. If outside of the USA, please check with your authorized local dealer for more information.

Kids these days. They love to ride, sometimes fearlessly, and they have more trails, bike parks and fun places to shred. We designed the Sidetrack to keep up with them. Styled after the adult Stoker mountain bike helmet, it does double duty by looking super cool and adding coverage lower on the head than traditional kids helmets. This model offers the option of MIPS (Multi- Directional Impact Protection System), which can provide an additional measure of protection in certain impacts. It has extended coverage in the rear, our easy-to-use ErgoDial Fit System, and a visor to complete the look. - One Size = 50-57cm

With more all-around coverage, the Sidetrack II is suited for the adventurous grom in your life. This all-mountain helmet offers a removable visor, an easy adjustable fit system, our sweat guide padding, and ready-for-action style that will get your child motivated to hit the trail! - 14 vents - Integrated MIPS (Multi-directional Impact Protection System) - MIPS is designed to reduce rotational forces that can result from certain impacts. By integrating the MIPS slip plane into the fit system, we are able to reduce complexity and weight for a compact, better ventilated helmet that fits more closely to the head. - Construction: Fusion in-mold polycarbonate shell - a process pioneered by Bell bonds the helmet's outer shell to the EPS foam liner to create a sturdier helmet. - Fit System: Ergo fit - sleek, easy-to-use dial system for one-handed adjustments (integrated with MIPS layer) - Retention System: No-twist tri-glides: quick-adjust fasteners that help keep straps flat and properly positioned - Interior: Sweat guide pad design pulls moisture away from the brow pad and away from eyewear

Fitness rides, adventure rides, family rides around the neighborhood. With its easy, approachable style, the Trace MIPS is an all-around performer that gives you loads of options. All-Purpose Performer - INTEGRATED MIPS—Integrated MIPS (Multi-Directional Impact Protection System) is designed to reduce rotational forces that can result from certain impacts. By integrating the MIPS slip plane into the retention system, we are able to reduce complexity and weight for a compact, better ventilated helmet that fits more closely to the head. - ERGO FIT—A lightweight fit system with an easy-to-turn rubber overmolded dial for adjustments (integrated with MIPS). - NO-TWIST TRI-GLIDES—Quick-adjust fasteners that help keep straps flat and properly positioned - SWEAT GUIDE—Sweat Guide pad design pulls moisture away from the brow pad and away from eyewear. Complies with the US CPSC Safety Standard for Bicycle Helmet for Persons Age 5 and Older

Featuring a sleek design with extended coverage and an integrated visor, the Spark backs up clean design and its well-ventilated shape with a great fit and the enhanced protection offered with MIPS. Designed for aspiring trail riders, the Spark lets you charge with confidence. - One Size = 50–57cm

The Asteroid fits all new and older Bern helmets with a two-hole mount located in the rear of the shell. USB rechargeable. - 12 Lumens - Micro USB rechargeable - 3 Light Modes (Flash 24 hours, Pulse 6.5 hours, Steady 5.5 hours) - Water Resistant - 16 grams - 26mm tall, 39mm wide, 20mm thick (w/o bracket)

- The Bandito Helmet is designed for tweeners, not quite small enough for a kids helmet and not quite big enough for the adult models - Designed after the Watts, the Bandito uses Bern's original visor shape and styling and scales it down a bit - EPS Thin Shell technology for lightweight, burly construction - S/M: 54-57cm, M/L: 55.5-59cm - 440g

- Street-smart looks and classic line - Fully upholstered, non-adjustable fitted interior in 5 sizes for the perfect fit - MIPS equipped for maximum protection - EPS/Thin Shell constructions uses a thin ABS shell lined with EPSFoam to create a burly lightweight lid - S: 54-55.5cm, M: 55.5-57cm, L: 57-59cm, XL: 59-60.5cm, XXL:60.5-62cm

- Ez-fit system - 13 vents with increased airflow - Removable flip visor - Lightweight - Lay flat adjustable straps - Compression-molded pads - Asteroid light compatible - Cold weather bike knit compatible - Average weight: 305.5g - MIPS: multi-directional impact protection system Helmet sizing: - Small: 52 - 55.5cm - Medium: 55.5 - 59cm

- 15% lighter than the classic Macon - Increased protection due to the Ribbed EPS liner - Multisport configuration - Construction—Thinshell - EZ-Fit System - Compatible with Bern Asteroid Light - Adjustable strap divider - Compression molded pads - Visor compatible - Average weight: 376g - MIPS : multi-directional Impact Protection System - 12 vents Sizing: - Small = 52 – 55.5cm - Medium = 55.5 – 59cm

- 15% lighter than the classic Macon - Increased protection due to the Ribbed EPS liner - Multisport configuration - Construction—Thin shell - EZ-Fit System - Compatible with Bern Asteroid Light - Adjustable strap divider - Compression-molded pads - Visor compatible - Average weight: 376g - MIPS: multi-directional Impact Protection System - 12 vents Helmet sizing: - Small: 52 - 55.5cm - Medium: 55.5 - 59cm - Large: 59 - 62cm

- Compass fit - 11 vents with increased airflow - Compatible with click-mount light - Lightweight - Integrated brim - Lay flat strap dividers - Compression-molded pads - Light & durable dual shell - Snowsport knit compatible - Average weight: 350g - Helmet sizing in cm: 59 - 62cm

- Compass fit - 11 vents with increased air flow - Compatible with click-mount light - Lightweight - Integrated brim - Lay flat strap dividers - Compression molded pads - Light & durable dual shell - Snowsport knit compatible - Average weight: 350g Sizing: - Small = 52 – 55.5cm - Medium = 55.5 – 59cm

- Zip Mold + construction - EZ-Fit retention system - 13 vents - Bike light compatible - Removable flip visor - CPSC standards EN1078 Helmet sizing: - Small: 52 - 55.5cm - Medium: 55.5 - 59cm - Large: 59 - 62cm

- Zip Mold + construction - EZ-Fit retention system - 13 vents - Bike light compatible - Removable flip visor - CPSC standards EN1078 Sizing: - Medium = 55.5 – 59cm - Large = 59 – 62cm

- Compass fit - 11 vents with increased air flow - Compatible with click-mount light - Lightweight - Integrated brim - Lay flat strap dividers - Compression molded pads - Light & durable dual shell - Snowsport knit compatible - Average weight: 390g(mips) - MIPS: multi-directional impact protection system

- 15% lighter than classic Brentwood - 20% more ventilation than classic Brentwood (13 vents) - Zip Mold + construction - EZ-Fit retention system - Compatible with Bern Asteroid light - Removable flip visor - Average weight: 345g - MIPS: multi-directional Impact Protection System

- Bern's entry into the road helmet market with a lightweight, aerodynamic design with max ventilation - MIPS equipped for maximum protection - Lightweight and breathable 360-degree adjustable Bern Yoke fit system developed with Boa - Reinforced in-mold EPS construction with 18 total vents - Interior air flow channels for added ventilation - Built-in sunglass storage on the shell exterior - Antimicrobial comfort padding - Small: 52-55.5cm, Medium: 55.5-59cm, Large: 59-62cm - 287g

- Visor: Yes - Impact Protection System: MIPS - Certification: CPSC, EN1078 - e-Bike approved: No

- Bern's safest helmet - Integrated light included (removable) - Construction—Inmold - Compass Dial Fit system - Reinforced U-Locks - Removable visor - Adjustable strap divider - Compression molded pads - Average weight: 350g - MIPS : multi-directional Impact Protection System - 13 vents Specs: - Integrated Light: Yes - Visor: Yes - Impact Protection System: MIPS - Certification: CPSC, EN1078, NTA 8776 E-bike - e-Bike approved: Yes Sizing: - Small = 52 – 55.5cm - Medium = 55.5 – 59cm - Large = 59 – 62cm

- Bern's safest helmet - Integrated light included (removable) - Construction—Inmold - Compass Dial Fit system - Reinforced U-Locks - Removable visor - Adjustable strap divider - Compression molded pads - Average weight: 350g - MIPS : multi-directional Impact Protection System - 13 vents Sizing: - Large: 59 - 62cm

This helmet mount works with all CatEye Lights. Pair it with the Volt 800 for the ultimate trail solution.

- FitRite retention dial for one-hand adjustment - 6 vents help keep your child cool and comfortable - Child universal fit 44-50cm

- Classic BMX/Skate style - 11 vents help keep you cool - FitRite retention dial for one-hand adjustment - Adjustable chin strap - Available in Youth sizes S/M (48-54cm) and L/XL (55-58cm)

- Lower rear coverage offers added protection off-road - Detachable visor adds style and helps keep the sun out of your eyes - FitRite retention dial for one-hand adjustment - Maximum air flow through 15 vents - Youth universal fit 50-54cm

- Lower rear coverage offers added protection off-road - Detachable visor - FitRite retention dial for one-hand adjustment - 11 large vents maximize air flow - Available in Adult sizes S/M (54-58cm) and L/XL (58-62cm) - Certification: CPSC, EN1078

- Simple, streamlined design for the commuter or recreational rider - FitRite retention dial for one-hand adjustment - 16 vents to keep you cool in traffic or in the park - Available in Adult sizes Small/Medium (55-59cm) and Large/X-Large (59-63cm) - Certification: CPSC, EN1078

You need to get out on your bike even in terrible weather. Fitting in an early commute or a mid-winter ride is easier when you're warm, comfortable, and visible. Keeping your head warm in bad weather can be the best way to fend off the elements. - GORE-TEX Product: durably waterproof, windproof and extremely breathable - Reflective band - Elastic hem - Reflective logo - Durably waterproof - Extremely breathable - All weather conditions - Engineered for Cycling - Weight: 0.8 ounces

When chilly, soggy weather rolls through, Garneau's H2 Helmet Cover keeps you both warm and dry. It's made from a polyurethane-coated spandex that's water-resistant. The sealed seams and a snug stretch band that fits easily over your helmet also keep water from seeping in. Plus, when the sun's not shining, the high-visibility yellow color and reflective accents will help make you visible to others. Technical Details: - Fabric : Polyurethane-coated Carbon WR spandex - Seams: Sealed seams: Keep you dry - Visibility Features: Reflective accent

Comfort, protection and a fresh new look for young cyclists on the move with the addition of MIPS for added protection. - Designed with fit and function in mind to create a value-packed helmet to keep young cyclists comfortable and protected - TransTextura Plus anti-microbial padding helps fight bacteria growth and reduce odors - Low and high speed impact-tuned construction with optimized low-density EPS - New Cinch Jr. fit system offers optimal coverage by cradling the head for full protection - Removable visor - Integrated magnetic mount for the Numen+ Link taillight (#400000143) - MIPS mimics the brain's own protection system by adding a low friction layer between the head and the helmet reducing rotational movement that causes strain to the brain at angled impacts

TEAM TODDLER. For the youngest riders, age 5 and under, protection is the first priority. The new Holler helmet makes it fun and easy. FEATURES - Designed with fit and function in mind to create a value-packed helmet to keep young cyclists comfortable and protected - TransTextura Plus anti-microbial padding helps fight bacteria growth and reduce odor - Low- and high-speed impact-tuned construction with optimized low-density EPS - New Bug Net to keep bugs out of the helmet - New Cinch Jr. Dial fit system offers optimal coverage by cradling the head for full protection - Integrated foam visor SPECIFICATIONS - Toddler: 46-51cm - Age: 5 and under - Certifications: CPSC/CE;AS/NZS

PROTECTION MADE EASY. For young riders, protection is the first priority. The new Hoot helmet makes it easy. FEATURES - We've got you covered! 1 year crash replacement program. - Designed with fit and function in mind to create a value-packed helmet to keep young cyclists comfortable and protected - TransTextura Plus anti-microbial padding helps fight bacteria growth and reduce odors - Low- and high-speed impact-tuned construction with optimized low-density EPS - New Cinch Jr. Dial fit system offers optimal coverage by cradling the head for full protection - Integrated foam visor SPECIFICATIONS - Child: 50-55cm - Age: 4-10 years - Certifications: CPSC/CE;AS/NZS

Tackle new trails. With authentic off-road style and a comfortable fit, this new helmet delivers it all for aspiring adventurers. Features - Created for the off-road enthusiast seeking performance features but with budget in mind - Trail-specific design with extended rear coverage - AirFlow ventilation system with deep internal AirFlow channels for cooling - Cinch Pro fit system offers optimal coverage by cradling the occipital bone for full protection, support and comfort - Removable, moto-style extended protection side-snap visor - Integrated magnetic mount for the Numen+ Link taillight and GoPro compatible mounting surface - MIPS mimics the brain's own protection system by adding a low friction layer between the head and the helmet, reducing rotational violence that causes strain to the brain at angled impacts

TACKLE NEW TRAILS. With authentic off-road style and a comfortable fit, this helmet delivers it all for aspiring adventurers. FEATURES - We've got you covered! 1 year crash replacement program. - Created for the off-road enthusiast seeking performance features but with budget in mind - Trail-specific design with extended rear coverage - Airflow ventilation system with deep internal airflow channels for cooling - Cinch Pro fit system offers optimal coverage by cradling the occipital bone for full protection, support and comfort - Removable, moto-style extended protection side-snap visor - Integrated magnetic mount for the Numen+ Link taillight and GoPro compatible mounting surface - MIPS mimics the brain's own protection system by adding a low friction layer between the head and the helmet reducing rotational violence that causes strain to the brain at angled impacts SPECIFICATIONS - Western: S (51-55cm);M (55-59cm);L (59-63cm) - Weight: 365g (size M) - Certifications: CPSC/CE;AS/NZS)